< INSPECTION. Introduction | INSPECTION. Photo360 >
To set up the project, go to the main page and click the button
¶
¶ GENERAL Tab
On this tab, you can change the image quality. The higher the resolution, the more resources the browser consumes.
¶ PROJECT Tab
Auto-Publish Photos – adds the newly uploaded photo to the album.
Change Status to Completed When a New Photo Appears at a Place – allows you to change the status of a place from Required to Completed as soon as a photo has been uploaded to the place.
If you need to keep track of completed photos, it is recommended to keep the toggle on. It is also recommended to set an automatic status reset from Completed to Required so that the photo maker always receives the correct information on the points that need to be made when synchronizing with the project.
¶ POINTS Tab
This setting allows you to reset the status of all project points from COMPLETED to REQUIRED according to a specified schedule.
Typically, it is enough for the photo maker to visit the site once a week, so it is recommended to set a status reset before the photo maker visits the site. The status reset is done so that the photo maker receives information on points with the Required status after synchronizing with the project.
To add a status reset, select the day of the week and time in UTC from the drop-down lists, and click +
If you need to reset the statuses not according to the schedule, but now, then click “Reset now”